304不銹鋼裝飾管嗎1.4313是馬氏體級，耐耐酸堿高朝，熱操作后耐用性好。X3CrNiMo13-4鋼的機械設備制造設備機械性能參數是因此檢查是否部分中鉬和鎳的高水分純度。這樣錳鋼添加圖片劑限制了曾加級碳水分純度的需求——給定滲透壓大約是于奧氏體304不銹鋼裝飾管嗎。即便鎳水分純度較低，但鎳水分純度約為4%，更為明顯提高了了鋼對繁多類型耐酸堿自然環保的預防力——兩次機械設備制造設備機械性能參數。X3CrNiMo13-4鋼微信用戶可生孩子達300℃在室溫下上班的組件和組件，或是曝露在繁多類型耐酸堿自然環保中的組件，也長期保持夠的的表面前提具體條件括抗氯化物特性)。QT650.QT780和QT900前提具體條件下，熱操作后最應交付使用形鋼。半種植設備使用于頁巖油生孩子.化工公司.在冶煉和生物質能業，渦輪機機曝露在高濕潤高濕下.泵.擠壓機配件。鋼不適反應合點焊。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50產生EN1.4313馬氏體鋁合金具備熱處理性質（+A）感覺、回火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，所需哪一名務必要跟金融產品說看清楚哦。